3rd Party Accessory Inspo for SCHLEPP Camera Carts.
Inspirations for a maximized functionality of your SCHLEPP ONE Camera Cart. All suggestions were tested during development by ourselves with great results, and without any issues.
However, please test third-party accessories yourself for their intended purposes before using them with your SCHLEPP ONE. We do not take any responsibility for the use of these products. We are not associated to any of the presented third-party manufacturers.
Please use the search engine of your choice to source the suggested articles in your region.
Accessory friendly.
All SCHLEPP Camera Carts have several unthreaded mounts (6.5mm and 10.5mm) for mounting cost-effective 3rd party accessories (not included) such as 16mm (5/8") pins or receptors, cheese plates, or half couplers for attaching lightweight light stands to the cart.
SCHLEPP Camera Carts were designed to grow with your creative ambitions and needs - and without breaking the bank.
Half Couplers
Half couplers are available in different
diameters. The suggested version is 32-35mm
in diameter, for attaching various Aluminium Alloy lightstands with 35mm tubes.
Find half couplers with quick lock levers.
E.g. Duratruss Jr Clamp Black ~10 €
Attach the half coupler with just a nut or wing nut (M10). Mount your strobe setup with an additional strap, always ready for the next shot or for fast deploy.
Cheese Plates
Up to 2x Cheese Plates can be mounted to the Top Shelf with 4x M6 or 4x 1/4" screws and nuts.
Middle shelf Owners: please make sure the fasteners of the Cheese Plate don't block (or scratch) the Middle Shelf in Transport mode, use screws with flat heads.
Perfect fit: Smallrig 1598 Easy Plate, ~ 10 €
Elastic Straps
Get a couple of them (with sturdy plastic hooks)! Great for attaching accessories or for securing your gear when moving.
The Fuxton Elastic Straps (Set of 4) from Amazon are a great fit (30, 60, 80 cm length). Their hooks are non-scratchy and sized perfectly for the SCHLEPP ONE Tubes.
And they are all black ;)
16mm (5/8") Add-Ons for Top Shelf
Amazing for lightweight accessories or for securely attaching gear when moving. (Max. weight 3-4 KG, do NOT attach long poles or articulating arms as those will act as levers and may damage the Top Shelf.)
Manfrotto R101, 136 Bushing Assy ~ 25-35€. Add a 16mm (5/8') female Receptor to the Top Shelf with 1x M8 Nut +
Screw. A star knob may be preferable.
Add a (Global Truss Multi) TV Spigot 28mm & 16mm (5/8") for less than 5 €!
Secure the pin on the Top Shelf with 1x M10 Screw. (M1O thread in Pin). A star knob may be preferable for quick removal.
Camera Hoop
First Digi Camera Hoop V2, ~120-150 €
Solid, full metal camera hoop from our friends at First Digi, Berlin. Keep your camera ready and safe, even when moving, and make some extra room on the top shelf of your SCHLEPP. Additional Super Clamp required.
With the optional step-down ring, it will also accommodate smaller cameras.
Articulating Arm + Super Clamp
9.Solutions Double Joint Arm (Medium, Tiny or Mini) ~ 50-90 €, very robust Magic Arm(s), capable of 10+ KG (22 lbs) load, non-twisting, very durable.
Can be used with super clamps. Please note that locked in magic arms act like levers and may cause damage to the tubes, if pushed or pulled too hard (do not push or pull a loaded cart by the articulating arm).
Great for attaching (and offsetting) Tablets, Displays or even Computers to your SCHLEPP ONE Camera Cart.
Espresso Pro Display
Available in 15" or 17", quick connection with just one single USB-C cable. Great Color Accuracy, brightness comparable to Eizo Monitors, super-lightweight (around 1 KG, or less). Amazing for indoor use.
Unfortunately, espresso displays are prone to reflections due to their glossy surfaces. No sun shades / hoods available yet.
The Display can be attached to SCHLEPP ONE with our Tether Clamp.
If you are interested in purchasing a display, please get in touch at shop@schleppcarts.com for a 10% promo code. (This is not an affiliate link, we just want you to get great accessories for your SCHLEPP Camera Cart.)
VESA Mount
If you want a lightweight, affordable VESA Mount with a quick release to attach small displays or other VESA compatible Accessories - we can recommend the NEEWER MA 016.
The Neewer mount will attach to any 3/8" (male) thread. (See following suggestion.)
We do NOT recommend to mount heavy duty monitors (Desktop Monitors) to a SCHLEPP Camera Cart - always remember that adding weight to a pole or similar will make your setup top heavy and less secure in operation.
The total weight of the cart (without accessories) is just below 13 KG.
Mini Clamps and Poles
By combining 2x Mini Clamps (a pair costs 20-30 € on Amazon) you can mount almost any Pole or small Mast to the tubes of your SCHLEPP ONE Camera Cart. The clamps can be connected with a 1/4"-1/4" Adapter/Screw and two (6mm) Washers (in some cases 3/8" -3/8" Adapters/Screws + 10mm Washers, depending on the make). Shoutout to YouTuber DSLR Video Shooter for this idea!
Adding a second pair of Clamps, and a solid pole like the K&M 2004 (500mm Length, 3/8" Male and Female Thread, ca. 8-10 €) is a solid way to offset your computer, small Display or other Accessories for very little money.
Desktop Laptop Stands
Always bring a simple, folding Desktop Laptop Stand to keep your computer cool while tethering or working...
Starting at just 10-15 €, a stand will keep your IT equipment from overheating.
Of course, our TETHER CLAMP (+ Arca ballhead, not included) is a more robust fix, especially when moving the cart.
Still haven't found what you're looking for?
Please send your suggestions - we will continue to add ideas and inspiration to maximize the use of your SCHLEPP ONE Camera Cart. Please also have a look at our 3D Files, if you are into 3D Printing.
And of course, all of our Add-Ons are great accessories for your SCHLEPP.
Secure your SCHLEPP ONE / SCHLEPP ONE-S CAMERA CART NOW.
